User talk:Lkeuning


On this talkpage you can send messages to

Op deze overlegpagina kunt u berichten en commentaren zenden aan


Lkeuning

Click here to start a new discussion

Click hier om een nieuw onderwerp te beginnen
.

  • Zet nieuwe tekst onder de oude tekst als u reageert op een bestaand onderwerp.
    Laat uw bericht inspringen door er 1 of meer malen een dubbele punt (:) voor te zetten
  • U gelieve uw berichten te ondertekenen zodat direct te zien is door wie en wanneer het bericht werd geplaatst:
    door 4 werveltjes te typen(~~~~), of op de handtekeningknop te klikken

Topics


Welcome

Welcome to WeRelate, your virtual genealogical community. We're glad you have joined us. At WeRelate you can easily create ancestor web pages, connect with cousins and other genealogists, and find new information. To get started:

If you need any help, I will be glad to answer your questions. Just click on my signature link below and then click on the “Leave a message” link under my name in the upper left corner of my profile page. Thanks for participating and see you around! Debbie Freeman --DFree 11:46, 23 June 2010 (EDT)


Next step: Review your GEDCOM [23 June 2010]

You're not done yet!

WeRelate is different from most family tree websites. By contributing to WeRelate you are helping to create Pando for genealogy, a free, unified family tree that combines the best information from all contributors.

Now that you have uploaded stamboom.ged, your next step is to review what your pages will look like, review any potential warnings, and combine (merge) people in your GEDCOM with matching people already on WeRelate. You need to review your GEDCOM before it can finish importing.

Note: if your gedcom contains many errors or multiple families, we’d ask that you resolve and correct the errors, delete this gedcom and re-submit it without the errors before merging it with families already on WeRelate. If the gedcom is very large, we’d suggest breaking it up into separate lines and importing them one at a time, which makes the review and correction process easier.

Click here to review your GEDCOM

Once you have finished your review and marked your GEDCOM Ready to import, one of our administrators will review your GEDCOM and finalize the import. This usually happens within 24 hours. You will receive a message here when the pages have been created.

--WeRelate agent 04:39, 23 June 2010 (EDT)

Welkom bij WeRelate & Gedcom [25 June 2010]

Hallo, welkom bij WeRelate.

I see that you are in the process of importing a gedcom that connects to the Ferwerderadeel and Leeuwarderadeel Project that user Leo Bijl and I are working on. It is nice to see new users adding information!

Do you have questions about the gedcom import process? I see that you fixed many of the items on the warning tab, that is good. Regarding places, since you often put only the town name, these will come into the system unmatched (what we call red-links). These can be fixed now, during the upload process, or after when the pages are all brought in.

One more thing... some of your names have brackets around them such as Klaas Klazes [Keuning]. I understand these are likely because they chose that surname in 1811. However, they cause problems for our system. For each of the People in your file with brackets, please click on the person's name in the Person Tab, click on Edit, remove the brackets, press save page. If you would like to show that he was known as both Klaas Klazes and Klaas Klazes Keuning, you can enter one of the names as an alternate name.

When you are all done with your corrections, click on the Import tab, press Ready to Import, and an administrator (likely myself) will have another look at your file.

We do have a couple of pages here in Dutch, the Portal:Netherlands (Nederland) and the Nederlands discussion forum. If you would like to ask questions in Dutch, the forum is a good place to start. --Jennifer (JBS66) 06:48, 25 June 2010 (EDT) (volunteer admin)


stamboom.ged Imported Successfully [26 June 2010]

The pages from your GEDCOM have been generated successfully. You may now:

For questions or problems, leave a message for Dallan or send an email to dallan@WeRelate.org.

--WeRelate agent 21:48, 26 June 2010 (EDT)

Jan Dijkstra and Jitske Gerrits [17 okt 2010]

Jan Dijkstra and Jitske Gerrits zijn voorouders uit jouw kwartierstaat en uit die van mijn schoondochter Geke van Asperen kwartierstaat Geke van Asperen--Fred Bergman 15:16, 17 October 2010 (EDT)


Next step: Review your GEDCOM [24 July 2020]

You're not done yet!

Now that you have uploaded keuning2020.ged into our review program, it is time for you to match your data to ours. Your next step is to review and resolve any potential warnings that your file might be showing and to match place names, source names and families to pages that may already exist in our database.

Notes:

  • You must complete all the steps before your GEDCOM can be considered for import. - We will keep your file in the queue for two months to give you time to finish, and you do not have to finish all at once.
  • If you did not follow the instructions for preparing your data before uploading your file or if your file does not contain at least one date and place for each person with sources, it is likely that your file will be rejected.
  • Volunteers are here to help. Please read the instructions first, but if you get stuck or have any questions, you can leave a message on the page for the GEDCOM review team. One of our volunteers will respond shortly.
  • Once you have completed the review and marked your GEDCOM Ready to import on the last screen, one of our volunteer administrators will review the file again and finalize the import. This usually happens within 24-48 hours. Please allow a little extra time around the holidays. When the import is finalized, you will receive a follow up message here on your Talk page.

Click here to enter the review program
You will see more instructions once you are in.

WeRelate is different from most family tree websites. By contributing here you are helping to create Pando for genealogy, a free, unified family tree that combines the best information from all contributors.


--WeRelate agent 21:51, 24 July 2020 (UTC)